Made in the U.S.A.
Made in the U.S.A.
|
 |
 |
 |
 |
 |
"The Powerful Difference"
Products: By Type
Accessories |
Fuse Block Assemblies |
|||
The Fuse Block Assembly (ME-125F, ME-200F, ME-300F and ME-400F) helps protects the battery bank and cables from damage caused by short circuits and overloads. Includes a Slow-Blow high current fuse with mounting block and cover. |
|||
ME-AGS, ME-AGS-WB & ME-AGS-S |
|||
The ME-AGS Auto Generator Start can automatically start your generator based on battery voltage or inside temperature. Available as a fully networked system (ME-AGS) or a standalone system (ME-AGS-S). Starts most diesel or gas generators. Adjustable settings include: run time, start volts DC, start temp, quiet time, and 24 hour clock.
|
|||
ME-BMK |
|||
The ME-BMK Battery Monitor Kit gives you the “percentage of charge” for your battery bank. This monitor reports state of charge, real time amps, amp hours in/out, and minimum/maximum DC volts. The kit includes the sense module, sense and communication cables, and a 500 amp shunt.
|
|||
ME-CB |
|||
The ME-CB Conduit Box fits on the front side of the Magnum ME, MS and RD Series inverters and accommodates installations where the electrical code requires the AC and/or DC wiring to be enclosed/protected by conduit.
|
|||
ME-DCLD  |
|||
 |
The ME-DCLD (DC Load Disconnect) Pigtail Adapter allow users to remove a 12 volt DC signal to disable the inverter function.
|
||
| Click for more information | |||
ME-ISW |
|||
 |
The ME-ISW (Ignition Switch Lockout) pigtail adapter is designed to automatically disable the inverter function when a 12 volt DC signal is supplied.
|
||
| Click for more information | |||
ME-PT2-AGS |
|||
 |
The ME-PT2-AGS (Pigtail Two-wire) adapter is designed to be connected to the AGS to allow the connected generator to be started by an external switching device.
|
||
| Click for more information | |||
ME-RSA and ME-RSA-M |
|||
 |
The ME-RSA and ME-RSA-M Remote Switch Adapters allow users to connect a external switch and remotely turn the inverter ON and OFF.
|
||
| Click for more information | |||
ME-SSI |
|||
The ME-SSI is a Series Stacking Cable Kit which allows two MS4024 inverters to be stacked together to achieve 120/240 VAC output. Series stacking is commonly used for well pumps, tools, motors, and other 240 VAC appliances.
|
|||
|
|
||||||||
