Remote Feature/Setting Compatibility

"The Powerful Difference"

Remote Features/Settings Compatibility

Magnum Energy's Advanced Remote Control (ME-ARC) has many advanced settings, and is designed to work with the advanced features in your Magnum inverter and/or other Magnum devices (i.e., ME-AGS-N or ME-BMK). This remote communicates with your inverter to allow the advanced features to be set up or enabled. However, your inverter may not have the advanced feature requested by the remote. In this case, the advanced setting request from the remote to your inverter (or any other Magnum device networked with the inverter) is not recognized and will not function. A feature/setting compatibility sheet is provided below for your inverter to allow you to determine which remote menus/features are compatible with your inverter.

First, determine your inverter’s compatibility level by using the INVERTER COMPATIBILITY LEVEL table below. Then use your inverter compatibility level (L1, L2, L3 or L4) to determine which setting/feature in your remote is compatible with your Magnum inverter and other Magnum device.

Determine Inverter Compatibility Level

Steps to determine the inverter’s compatibility level:

1. Obtain your inverter’s software revision.

Note: To view the inverter’s software revision level, push the TECH button on your remote and access the Revisions menu.

2. Use the INVERTER COMPATIBILITY LEVEL table to determine the inverter’s compatibility level based on your inverter’s software revision.

INVERTER COMPATIBILITY LEVEL
Inverter/ Charger Models	Level 1 (L1)	Level 2 (L2)	Level 3 (L3)	Level 4 (L4)
RD1824	≥ Rev 2.6	≥ Rev 3.4	NA	≥ Rev 5.4
RD2212	--	≥ Rev 3.4	NA	≥ Rev 5.4
RD2624E	--	--	≥ Rev 4.1	≥ Rev 5.4
RD2824	≥ Rev 2.6	≥ Rev 3.4	NA	≥ Rev 5.4
RD3924	≥ Rev 2.6	≥ Rev 3.4	NA	≥ Rev 5.4
RD4024E	--	--	≥ Rev 4.1	≥ Rev 5.4
ME2000	≥ Rev 2.6	≥ Rev 3.6	≥ Rev 4.2	NA
ME2012	≥ Rev 2.6	≥ Rev 3.6	≥ Rev 4.2	NA
ME2512	≥ Rev 2.6	≥ Rev 3.6	NA	NA
ME3112	≥ Rev 2.6	≥ Rev 3.6	NA	NA
MM612	--	≥ Rev 1.0	NA	NA
MM612AE	--	≥ Rev 1.0	NA	NA
MM1012E	--	≥ Rev 1.1	≥ Rev 1.4	NA
MM1212	--	≥ Rev 1.0	≥ Rev 1.4	NA
MM1212AE	--	≥ Rev 1.0	≥ Rev 1.4	NA
MM1324E	--	≥ Rev 1.2	≥ Rev 1.4	NA
MM1512AE	--	≥ Rev 1.3	≥ Rev 1.4	NA
MM1524AE	--	≥ Rev 1.1	≥ Rev 1.4	NA
MMS912E	--	--	≥ Rev 1.5	NA
MMS1012(G)	--	≥ Rev 1.0	≥ Rev 1.4	NA
MS1512E	--	--	--	≥ Rev 5.2
MS2000	--	≥ Rev 3.2	≥ Rev 3.7	≥ Rev 5.4
MS2012	--	≥ Rev 3.2	≥ Rev 3.7	≥ Rev 5.4
MS2024	--	--	≥ Rev 3.8	≥ Rev 5.0
MS2812	--	≥ Rev 3.2	≥ Rev 3.7	≥ Rev 5.4
MS2712E	--	--	≥ Rev 3.8	NA
MS3748AEJ	--	--	≥ Rev 3.8	NA
MS4024	--	≥ Rev 3.3	≥ Rev 3.7	≥ Rev 5.4
MS4024AE	--	≥ Rev 3.3	≥ Rev 3.7	NA
MS4024PAE	--	--	--	≥ Rev 4.0
MS4124E	--	--	≥ Rev 3.8	≥ Rev 5.3
MS4348PE	--	--	--	≥ Rev 5.5
MS4448AE	--	≥ Rev 3.3	≥ Rev 3.7	NA
MS4448PAE	--	--	--	≥ Rev 4.1

INVERTER COMPATIBILITY LEVEL =

Compatible Remote Control Features/Settings
	Once you have determined your Inverter's Compatibility Level, choose your remote control (and its software revision) below to view a document which shows - on page 2 - the inverter compatibility level required to use particular menu feature/settings in your remote. Note: If your inverter’s compatibility level is the same or greater than the inverter compatibility LEVEL REQUIRED shown in the Compatibility Matrix, then your inverter can support the device feature/setting you want to use.

(387kb)

ME-ARC (Revision 2.3 and 2.4) Compatibility Matrix